Gible Amigurumi Pattern

posted in: Free Amigurumi Patterns | 0





Presenting Gible, the land shark Pokemon! He resembles a huge mouth with limbs and has a forehead that’s a mix between shark and war-jet.

Gible is a ground and dragon type Pokemon. Perhaps it’s name, ‘Gible’ stems from the combo: Ground and Nibble? I’d like to take credit for all of this theorizing, but the truth is, I get my trivia from Bulbapedia.

But anyway, without further ado, here is the pattern for my Gible-inspired amigurumi!

Pokemon Amigurumi Gible
Materials

  • Yarn: dark blue, light blue, red, maroon (for inside of mouth)
  • 3.5 mm crochet hook
  • fiber-fill stuffing
  • felt (white, black, pink) for details: eyes, teeth, tongue
  • Scissors, yarn needle for assembly, felting needle if desired.

 
Abbreviations
R(#): Round number
MR: magic ring
Sc: single crochet
dc: double crochet
inc: increase (2 sc in same stitch)
dec: decrease (decrease 2 sc into one). I recommend the Invisible Decrease
tch: turn chain
sl st: slip stitch
ch: chain
f/o: fasten off

Check out my Learn to Crochet page for video tutorials on how to do the types of stitches listed above.
 
 
pokemon amigurumi Gimble
Head & Body

Begin with dark blue:
R1. 6 Sc in MR (6)

R2. Inc around (12)

R3. ‘Sc 1, inc’ around (18)

R4. ‘Sc 2, inc, around (24)

R5. ‘Sc 3, inc’ around (30)

R6. ‘Sc 4, inc’ around (36)

R7. Sc around (36)

R8. Chain 7, Skip over 15 Sc’s on the base, Sc in the remaining  21 Sc of the round (28)
The space created here is the roof of the mouth and will be closed later.

R9. Chain 15, Skip over 7 Sc’s on the base, Sc in the remaining 21 Sc of the round (36) *see picture below*
The space created here is the bottom of the mouth and will be closed later.

*Note* If I could change one thing about this pattern, I would do the above ‘ch 15’ in red and used color changes in the following rows beneath it to make the jaw and tummy. If you’re an experienced crocheter and want to give it a try – now is the time!

R10. Sc around (36)

R11. Working in front loops only: Sc 15. For the rest of the round continue to Sc in both loops as usual (36)

R12. ‘Sc 3, Dec’ three times, then Sc in remaining 21 Sc (33)

R13. Sc around (33)

R14. ‘Sc 2, Dec’ three times, Sc 5. Change color to light blue. Sc 14. Change color to dark blue. Sc 2 (30)

R15. Sc 14. Change color to light blue. Sc 14. Change color to dark blue. Sc 2 (30)

R16. ‘Sc 1, Dec’ four times. Sc 18 (26)

R17. Sc around (26)

R18. ‘Sc 11, dec’ twice (24)

R19. ‘Sc 2, dec’ around (18)

By the way, you don’t have to worry about stuffing yet, as this can be done when we close the openings for the mouth

R20. ‘Sc 1, dec’ around (12)

R21.  Dec around (6)

Close loop and F/o
 
 

pokemon amigurumi Gible Mouth Tutorial
 
Closing the Mouth

First, be sure to add stuffing through the mouth into the body.

Next, locate the unworked back loops of R10 of the Body. Begin sc here with Maroon:
R1. (Along inner mouth): Sc 4, Dec 3, Sc 5, ( continue along the chain7/back of mouth) Sc 7 (19)

From here I basically just decreased around until I felt the hole was small enough to tie closed. If you’re obsessed with following instructions “to the T” you can do the following:

R2. Dec 9, skip last sc. (9)

R3. Dec 3, leave rest unworked. Close the hole.

Repeat the above instructions to ‘close’ the top of the mouth, working on the inner loops of the top. Be sure to add stuffing before closing.
 
 
pokemon amigurumi Gimble
Forehead Fin

Using dark blue:
R1. 4 Sc in MR (4)

R2. Sc around (4)

R3. Sc 1, Inc, Inc, Sc 1 (6)

R4. Sc 2, Inc, Inc, Sc 2 (8)

R5. Sc 3, Inc, Inc, Sc 3 (10)

R6. Sc around (10)

R7. ‘Inc, Sc 4’ twice (12)

R8. ‘Sc 3, inc’ around (15)

R9. ‘Sc 4, inc’ around (18)

R10. Sc around (18)

Add a light amount of stuffing to the back of the fin only.

R11. ‘Dec, Sc 7′ twice (16)

R12. ‘Dec, Sc 6’ twice (14)

R13. ‘Dec, Sc 5’ twice (12)

R14. ‘Dec, Sc 2’ three times (9)

R15. ‘Dec, Sc 1’three times (6)

R16. ‘Dec, Sc 1’ twice (4) F/o and close loop.

The line of ‘decreases’ from row 11- row 16 should make a ‘ridge’ along the front half of the forehead fin. I pinched the fin to make this ridge more prominent before attaching to the head. I did not stuff the front part of the fin.
 
 
pokemon amigurumi Gimble
Head Missiles

Make 2: Begin with dark blue:
R1. 6 Sc in MR (6)

R2. ‘Sc 2, Inc’ around (8)

R3. ‘Sc 3, Inc’ around (10)

R4. ‘Sc 4, Inc’ around (12)

Change color to light blue:

R5-R7. Sc around (12) three times

Change color to dark blue:

R8. Sc around (12)

R9. ‘Sc 4, dec’ around (10)

R10. ‘Sc 3, dec’ around (8)

Be sure to add stuffing to the missiles.

R11. ‘Sc 2, dec’ around (6)

F/o and close loop.
 
 
pokemon amigurumi Gimble
Arms

Make 2. Using dark blue:
R1. 4 sc in MR (4)

R2. Inc around (8)

R3. Begin working in front loops only:

Sl st onto next sc on base. chain 3, sl st onto same base.

Repeat the above twice more over the next two stitches in the round.

Working in both loops/as normal: Sc in remaining 5 unworked stitches. (8)

R4. In first 3 unworked back loops: Sc 3, then Sc in remaining stitches of round (in both loops.) (8)

R5. Sc around (8)

R6. ‘Sc 3, Inc’ around (10)

R7-R8. Sc around (10) two times.

Stuff the arms lightly.

R9. Dec around (5)

Close loop, f/o, leave a tail for sewing.
 
 
Feet

Make 2. Using dark blue:
R1. 6 Sc in MR (6)

R2. Inc around (12)

R3. ‘Sc 1, inc’ around (18)

R4-R5. Sc around (18) twice

R6. ‘Sc 1, dec’ around (12)

Be sure to add stuffing

R7. Dec around (6) Then, make the toes:

Sl st onto next sc on base. chain 3, sl st onto same base.

Repeat the above twice more over the next two stitches in the round.

Close loop, f/o, leave a tail for sewing.
 
 
pokemon amigurumi Gimble
Tail

Using dark blue:
R1. 4 Sc in MR (4)

R2. ‘Sc 1, inc’ around (6)

R3. ‘Sc 2, inc’ around (8)

R4. ‘Sc 3, inc’ around (10)

R5. ‘Sc 4, inc’ around (12)

R6. ‘Sc 5, inc’ around (14)

R7. ‘Sc 6, inc’ around (16)

Stuff, f/o and leave a long tail for attaching to the body (do not close opening.)
 
 
pokemon amigurumi Gible
Red Jaw & Tummy

Using red, work in rows. Reference this video on working in rows and turn chains if you’re unfamiliar with this.

R1: Ch 2, tch (2)

R2: Sc 1, Inc, tch (3)

R3: Sc 2, Inc, tch (4)

R4: Sc 4 , tch (4)

R5: Sc, Inc, Sc, Inc, tch (6)

R6: Sc 6, tch (6)

R7: ‘Sc, inc’, repeat across the row, tch (9)

R8; Sc 9, tch (9)

R9: ‘Sc 2, inc’ repeat across the row, tch (12)

R10-R12. Sc 12, tch (12)

F/o and leave a long tail for sewing onto the body.
 
 

Assembly of Crochet Gible

 
Forehead Fin: R1 of the forehead fin extends beyond the back of the head. R16 of the forehead fin reaches all the way to the front of the mouth – essentially forming a ‘nose.’ Pinch the front top piece of the forehead fin to form a ‘ridge’ above the nose and across the middle of the head. Sew on. Sew on the Head Missiles – one to each side of the forehead fin piece.

Red jaw/tummy – sew the red jaw to the front of Gible extending from the mouth to the bottom of the body. I found the extra red piece made the bottom jaw seem huge- I had to sew the edges of it (near where the arms attach) very tightly into the body to prevent it looking like Gible has a huge under-bite.

Arms, Legs, and Tail- sew on the arms, legs, and tail as shown in the pictures. Pin in place the legs and tail before sewing to ensure that Gible can stand balanced on these 3 limbs.

Facial details: the teeth, eyes, and tongue were added using needle felting technique.

I hope you enjoy your amigurumi Gible!

 

Piplup Crochet Amigurumi Gible Gible Gible!

Thank you for trying this pattern – I hope you enjoy your Amigurumi Gible!

 

A downloadable pdf version of this crochet pattern will be coming soon to my shop!

This pattern by StringsAway is for personal use only. Please do not sell or redistribute the pattern as your own.

Leave a Reply